Description

PANSEAL Paste Grade Epoxy

PANSEAL Paste Grade Epoxy is a unique, multi-component, novolac, trowellable epoxy designed for use as a chine repair or lap weld feathering product for steel tanks. It is often used in conjunction with chemical resistant topcoats such as PANSEAL or DX-3300.  PANSEAL Paste Grade Epoxy has excellent chemical resistance to a wide range of petrochemical products, fuels, organic/inorganic acids & alkalis.  It’s long re-coat window allows it to be top-coated up to 14 days,  depending on temperatures.  PANSEAL Paste Grade Epoxy is comprised of 100% solids and contains no VOC’s.  PANSEAL Paste Grade’s excellent adhesion properties allow it to bond to steel, concrete and iron even when coating conditions are less than ideal.

PANSEAL Paste Grade Epoxy can be used on a variety of substrates and applications.  Typical applications include leak repair, wastewater tanks, lift stations, wet wells, manholes, storage tanks cooling tower repair, anchor adhesive, plate bonding, pump casting and serves as a high strength structural adhesive for metal bonding.  PANSEAL Paste Grade is ideal for majorly damaged surfaces, vertical applications and ceiling work because of it’s thick viscosity. PANSEAL Paste Grade can be sanded, drilled, tapped or machined.

PANSEAL Paste Grade Epoxy Features & Benefits

• Immediately seals leaks, cracks on majorly damaged surfaces
• Thick viscosity – Ideal for vertical repairs and ceiling work
• Easy to apply with a trowel
• Bonds chemically and mechanically to substrate
• Works on metal, fiberglass, stainless steel, concrete, and wood surfaces
• 100% solids and entirely free of solvents and volatile organic compounds

 Recommended Uses for PANSEAL Paste Grade

• Wastewater and Storage Tanks
• Cooling Tower Repair and Structural Metal/Concrete Repair
• Structural Adhesive for Metal Bonding
• Resurfacing Damaged Areas

PANSEAL Paste Grade Directions
Clean surface removing all dirt, dust, oil and all other contaminants. 

Preparation recommendations
Pressure wash, grinder, wire wheel, sandblast

Stainless Steel Surfaces: obtain a well etched surface

Concrete Surfaces:  Prime with DX-1100 Primer for Concrete prior to applying PANSEAL

Mixing
Power mix part A resin separately, then add part B hardener and power mix.   Pay attention to the sides and bottom of the bucket and mix to obtain a uniform color.

Application
Once mixed be ready to apply. Do not keep the blended coating in the original container unless immediate use is planned.  Otherwise, exothermic heat created during the curing process will considerably shorten the pot life.  PANSEAL Paste Grade is a 100% solids coating and may require adjustments in application techniques.  Apply directly onto the prepared surface with a trowel or spatula tool.  Press down firmly to remove entrapped air, fill all cracks, and ensure maximum contact with the surface. PANSEAL Paste Grade is fully machinable using conventional tools once cured and can be sanded.

Brush:  A brush can be used to smooth uncured surface with solvent if desired.

Cleanup
Use MEK or Acetone. In case of spillage, absorb and dispose of in accordance with local, applicable regulations.

Safety
Refer to the SDS PDF